SWENSON KNIVES
Photo Gallery
Swenson Knives Photo Gallery
Here I have pictures of some knives I have made and the sheaths that went with them. These are examples of some of the designs and options available. Let me know if you want one you see or a variation of it, or just enjoy the photos. Thanks for stopping by.
email me for more information: luke@swensonknives.com
This knife has an over all length: 10.5".
It is made of 01 tool steel and is flat ground
with a hand rubbed 400 grit finish.
The handles are brasilian rosewood with 416 stainless pins and thonghole tubing.
Here it is with its hand-stitched 7 oz leather sheath with thong and stud retainer.
This knife has an overall length of 6 inches. It is made of 01 tool steel and is flat ground with a hand-rubbed 400 grit finish. The handle scales are stabilized mesquite.
It is accompanied by a mosaic pins hand stitched 7 oz sheath with flower design and stainless steel clip.
This knife has an overall length of 6.5 inches. It is made of 5/32 stock, 01 tool steel. The blade is approximately 3" and is flat ground with a convex edge. The handle is bloodwood with stainless steel pins and a thong hole.
The 7oz pigskin lined leather sheath has a three-way basket weave and is customized with the initials of the owner.
This knife was commissioned for Alan Halcon. It has an overall length of approximately 11" and is made from 3/16 stock 01 tool steel. The wide belly blade is 6" long with a flat grind. The handle is micarta with stainless steel pins and thong hole tubing, and has an integral guard.
The sheath for this blade is 8oz hand stitched leather customized with initials.
This knife has an overall length of approximately 10.5" and is made of 3/16 stock 01 tool steel. It has a 6" flat ground blade with a convex edge. The handle scales are micarta.
Here is the same knife in its sheath. The sheath is 7-8oz leather, hand-stitched with a 3 way basket weave pattern.
This camp knife is made of 01 tool steel. It has a 10" flat ground blade with a convex edge. The handle is black canvas micarta with stainless steel fittings and thong hole tubing.
The sheath is hand-stitched 9oz leather, dyed black, with a pouch and ferro rod.
This knife is made of 01 Tool Steel. The blade is 9" long with a spear point, and flat ground with a convex edge.
The handle is micarta scales with stainless steel fittings.
The custom sheath for this beauty is 9oz hand stitched leather with custom tooling and a belt loop.
This multi-use knife was commissioned for Mrs. Wolf of Two Wolves Outdoor.
The blade is bead-blasted A-2 steel, flat ground with a convex edge.
The handle is micarta scales over a full tang.
The sheath is 7oz hand-stitched pigskin, lined with a custom design.
PSKS